URC URC-RFS200 Owners Manual - Page 20
Erasing Commands
View all URC URC-RFS200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
ERASING COMMANDS Erasing Learned Buttons, Macros or Favorite Channels 37 Erasing Commands - Overview You can erase an individual button with a learned command, a macro or a favorite channel. You can erase an ENTIRE Component's learned command or macro buttons. You can also erase ALL your learned commands on all Components or all your macros or favorite channels everywhere. If you really want a fresh start, it is possible to reset everything to the factory default settings. Erasing Learned Buttons, Macros or Favorite Channels STEP 1: Press and hold the MAIN and ENT (Enter) buttons at the same time for approximately 3 seconds, until the word "SETUP" is displayed at the top of the LCD screen. This signals that you are now in setup mode. IMPORTANT:You now have 30 seconds to perform the next step while you are in SETUP mode. If you don't press a button within 30 seconds, SETUP will disappear from the screen, signaling that you have exited setup mode and you will need to start over. STEP 2: Press a PAGE button to display Page 2 of Setup. STEP 3: Press the ERASE display button on the LCD screen. STEP 4: Press either the LEARN, MACRO or FAV button. The following screen appears: ALL - Erases ALL of the specified (Learned, Macro or FAV but-tons everywhere in the RF20) DEVICE - Erases all learned or Macro buttons in a single Component (NOTE: This option is not available for FAVs.) KEY - Erases one button only. 38 Erasing Learned Buttons, Macros or Favorite Channels STEP 5: If you press ALL, the RF20 displays a "SURE?" button. After the SURE button is pressed, all the buttons will be erased. If you press DEVICE, a list of Components will appear. Press the Component button that you wish to erase. The bottom of the screen will flash ERASE twice, then ERASED. If you press KEY, you'll have to navigate to the Component and Page you want using the MAIN, COMPONENT and PAGE buttons. Press a button to erase it. The bottom of the display will flash ERASE twice, then ERASED. STEP6: To return to normal operating mode, press the MAIN button four times. SURE BUTTON ERASING COMMANDS