URC MX-6000 Owners Manual - Page 5
Connecting the Battery Pack, Using the Charging Base, Two Way via WiFi - remote
View all URC MX-6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
OCE-0026G(MX-6000)_REV04.QXD 2/22/11 10:17 AM Page 5 MX-6000 TWO WAY TOUCH SCREEN Connecting the Battery Pack Unlock the rear cover by pressing down on the two locking tabs and sliding the battery cover forward. Remove the cover. For shipment from the factory, the battery is left out of the MX-6000. Place the battery into the battery compartment, making sure you align the contacts on the battery to the contacts on the MX-6000. The battery will snap into place when aligned properly. Replace the cover and snap it into place. Using the Charging Base Plug the 6V DC adapter into a power outlet and into the back of the charging base. Gently place the MX-6000 into the cradle of the charging base. It automatically aligns itself to the contacts on the charging base. The Status light should imme- diately light. Red indicates that it is charging. Blue shows that it is fully charged. There is no harm in leaving the MX6000 on its charging base Red indicates charging, Blue that the remote is fully charged. whenever it is not in use. Two Way via WiFi To use the MX-6000 with any two way companion product, the MX-6000 must be configured by your installer to be part of a LAN (local area network) via a WiFi b/g access point or router. This is not user configurable. If you have any questions, consult with your custom installer. Page 5