Toshiba XE30U User Manual - Page 17
Select [OFF].
![]() |
UPC - 883974118724
View all Toshiba XE30U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Using handy features (Continued) How to set password (from [Off] to [On]) 1 Select [Password] in the Default setting 2 menu and press the or button. 2 Select [Password setting] in the password registration, setting menu, and press the or button. 3 Select [On]. 4 Select [OK] and press the button. The password entry screen is displayed. 5 Enter the password using numeric keys of the remote control. 6 The password setting will be set as [On]. How to operate when password is [On] 1 Turn on the power. 2 The lamp lights and the password entry screen appears. 3 Enter the password using numeric keys of the remote control. If the entered password is correct, the start-up screen appears and the projector goes into normal operation. If the password is wrong, a message appears to prompt you to re-enter the password, and again the password entry screen is displayed. If you enter a wrong password for more than 5 times, the projector will automatically power off and enter standby mode. How to set password (from [On] to [Off]) 1 Select [Password] in the Default setting 2 menu and press the or button. The password entry screen is displayed. 2 Enter the password using numeric keys of the remote control. 3 Select [Password setting] in the password registration, setting menu, and press the or button. 4 Select [OFF]. 5 Select [OK] and press the button. Note • While the password setting is [On], the password entry screen will be displayed only when the power is turned on next time. Operations 32 33
![](/manual_guide/products/toshiba-tlpxe30u-user-manual-42cc29c/17.png)