Toshiba R950 PT530C-04N02V User Manual - Page 177
eSATA device, Additional memory module, When System ON CDP Charge Mode or USB
View all Toshiba R950 PT530C-04N02V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
Problem The "USB Wakeup function" does not work. Procedure When "System ON CDP Charge Mode" or "USB Sleep and Charge function" is enabled, the "USB WakeUp" function does not work for ports that support the Sleep and Charge function. In that case, use an USB port that does not have the USB Sleep and Charge function-compatible icon ( ) or change to disable both "System ON CDP Charge Mode" and "USB Sleep and Charge function". eSATA device In addition to the information in this section, please also refer to the documentation supplied with your eSATA device. Problem Procedure eSATA device does not work Remove the eSATA device from the computer and then reconnect it to a free port it in order to ensure it is firmly attached. A connected eSATA device may not be recognized if it is connected to the computer's eSATA/USB combo port while the computer is in Sleep Mode or Hibernation Mode. If this occurs, disconnect the eSATA device and then reconnect the device while the computer is turned on. Ensure that any required eSATA device drivers are properly installed - to achieve this you should refer to both the device documentation and the operating system documentation. If you are still unable to resolve the problem, contact TOSHIBA Support. Additional memory module Please also refer to Chapter 3, Operating Basics, for further information on installing and removing memory modules. User's Manual 6-14