Timex T228B User Guide - Page 6

Setting the Clock 1. Press and hold the  Time Set Button while pressing the  Hour Set Button and the  Minute Set Button. Be sure to set the correct AM/PM time, shown by the display's PM Indicator. 2. After setting the time, release the  Time Set Button. Operating the Alarm Setting the Alarm 1. To set the wake time, press and hold the  Alarm Set/Reset Button while pressing the  Hour Set Button and the  Minute Set Button. Be sure to set the correct AM/PM wake time, shown by the display's PM Indicator. Release the  Alarm Set/Reset Button. 2. To select the wake sound and activate the alarm, slide the  Function Switch to the "Radio" or "Buzzer" position. (See the Listening to the Radio section for instructions on setting the radio station and volume.) The Alarm Indicator on the display will light. NOTE: The buzzer alarm is a "Gentle Wake" alarm, meaning that the volume will rise as time passes. Turning off the Alarm 1. When the alarm sounds, press the  Alarm Set/Reset Button to turn the alarm off and reset it for the same time on the following day. To turn the alarm off completely, slide the  Function Switch to the "Off" position, so that the Alarm Indicator no longer appears on the display. 2. To activate the snooze feature, press the  Snooze/Sleep Off Button. The alarm will shut off for nine minutes before sounding again. This can be repeated several times during the two-hour cycle. 3. If it is not turned off, the alarm will sound for an hour before stopping. As long as the Alarm Indicator appears on the display, the alarm will sound at the set time. Adjusting the Display Backlight • This alarm clock radio features an adjustable display brightness, with dim and bright settings. To select a setting, slide the  Dimmer Switch to the "Hi" or "Lo" position. 5