TRENDnet TEW-830MDR2K Users Guide - Page 45

TRENDnet User's Guide Allow remote access to your router management page Tools > Web Management You may want to make changes to your router from a remote location such at your office or another location while away from your home. 1. Log into your router management page (see "Access your router management page" on page 23). 2. Click on Tools and click on Web Management. 3. Review the setting on the Web Management section. To save changes to this section, click Apply at the bottom of the page when finished. • HTTPS - HTTPS access is enabled by default and is more secure than standard HTTP when accessing the router management page from a web browser. If disabling HTTPS, this will enable HTTP access. • Remote Access o Enabled: Selecting enabled with allow remote access to the router management page from the Internet. o Method: All hosts will allow access from any public IP address on the Internet to access your router management. Specific host will restrict access to a single public IP address. o Remote Port: Enter the port to assign remote access to the router. It is recommended to leave this setting as 8080. Note: If you have configured port 8080 for another configuration section such as virtual server or special application, please change the port to use. (Recommended port range 1024-65534) o HTTPS Port: If using HTTPS for accessing your router management page, you can change the default HTTPS port used. If changing the default HTTPS port, you will need to specify the port when accessing the router management page. (ex: https://192.168.10.1:5000) © Copyright 2020 TRENDnet. All Rights Reserved. TEW-830MDR / TEW-830MDR2K 43