TRENDnet TEW-714TRU User's Guide - Page 47

TEW-714TRU User's Guide Troubleshooting Situation: I enterd http://tew‐714tru but I am not able to access the unit. What should I do? Solution: Please enter the default IP address (192.168.10.1) to login. Proceed following steps: 1. Turn the TEW-714HRE's power switch on. 2. Reset the device to factory default settings by pushing the reset button for 2 seconds. 3. Make sure you have a good wireless connection to the default SSID:TRENDnet714_2.4GHz_XXXX printed on device label. 4. Make sure your laptop/PC does not join to any domain 5. Open a browser and enter http://tew‐714tru (The leading http:// has to be entered to resolve the host name) Situation: How do I reset the device to factory default? Solution: 1. Use a pin such as a staple to press and hold the reset button at the bottom of the TEW-714TRU for 2 seconds. 2. You can also reset from the management page. Troubleshooting Situation: I enterd http://192.168.10.1 but I am not able to access the unit. What should I do? Solution: 1. Turn the TEW-714TRU's switch on. 2. Reset the device to factory default settings by pushing the reset button for 2 seconds. 3. Make sure you have a good wireless connection to the default SSID:TRENDnet714_2.4GHz_XXXX printed on device label. 4. Make sure your computer has no other network connections. For example, disconnect your Ethernet cable. 5. Open a browser and enter http://192.168.10.1 Situation: How do I make sure my unit is connected to a router/AP? Solution: The LED will turn solid green when the TEW‐714TRU is successfully connected to a router/AP. Situation: How can I access the TEW-714TRU once it is setup? Solution: You can use its host name (http://tew-714tru) or IP address to access the TEW-714tru. When setup in repeater mode, the TEW-714TRU will get an IP address from your router (DHCP). Check the DHCP client list on your router if you want to access the TEW-714TRU with its IP address. © Copyright 2013 TRENDnet. All rights reserved. 45