TP-Link TD-VG3511 TD-VG3511 V1 User Guide - Page 45
MAC Clone, 4.4.6 ALG Settings, TD-VG3511, End IP Address, Leased Time, Advanced Setup, MAC Clone
![]() |
View all TP-Link TD-VG3511 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide • End IP Address: Enter a value for the DHCP server to end with when issuing IP addresses. The End IP Address must be smaller than 192.168.1.254. The default End IP Address is 192.168.1.199. • Leased Time: The Leased Time is the amount of time in which a network user will be allowed connection to the Modem Router with their current dynamic IP address. Enter the amount of time, in hours, then the user will be "leased" this dynamic IP address. After the dynamic IP address has expired, the user will be automatically assigned a new dynamic IP address. The default is 1440 minutes. The detailed configuration about DHCP server, please refer to section 4.5 DHCP Server. 4.4.5 MAC Clone Choose menu "Advanced Setup"Æ"MAC Clone", you can configure the MAC address of the WAN Interface as shown below. The WAN Connection List displays the Interfaces you have configured on the section 4.4.1 WAN Settings, 4.4.2 EWAN and its default MAC Address. You can select corresponding WAN Interface from the drop-down list and click MAC Clone button to clone your current PC MAC, and then click Save. ) Note: Figure 4-16 Only the PCs in LAN can use this function. MAC clone may cause reconnection. After MAC Clone, the bridge connections sharing the same VPI/VCI with other connections may not work. To make sure other connections can work well, we suggest that you avoid cloning the same MAC address to them. 4.4.6 ALG Settings Choose menu "Advanced Setup"Æ"ALG Settings", and then you can configure the basic security in the screen as shown in Figure 4-17. 36
![](/manual_guide/products/tplink-tdvg3511-tdvg3511-v1-user-guide-e7c1467/45.png)