TP-Link N600 TL-WDR3500 V1 User Guide 1910010836 - Page 45
Use the WPS Button, Gen New PIN
View all TP-Link N600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
TL-WDR3500 N600 Wireless Dual Band Router Figure 4-16 WPS WPS Status - Enable or disable the WPS function here. Current PIN - The current value of the Router's PIN is displayed here. The default PIN of the Router can be found in the label or User Guide. Restore PIN - Restore the PIN of the Router to its default. Gen New PIN - Click this button, and then you can get a new random value for the Router's PIN. You can ensure the network security by generating a new PIN. Disable Router's PIN - If this box is checked, and then wireless clients will not be able to connect to the wireless network with PIN code. Add device - You can add a new device to the existing network manually by clicking this button. If the wireless adapter supports WPS, you can establish a wireless connection between wireless adapter and Router using either Push Button Configuration (PBC) method or PIN method. Note: To build a successful connection by WPS, you should also do the corresponding configuration of the new device for WPS function meanwhile. I. Use the WPS Button Use this method if your client device has a WPS button. Step 1: Press the WPS/Reset button on the back panel of the Router, as shown in Figure 4-17. You can also keep the default WPS status as Enabled and click the Add device button in Figure 4-16. Then choose "Press the button of the new device in two minutes" and click Connect, shown in Figure 4-18. - 35 -