TP-Link EAP110 EAP Controller Software V1 User Guide - Page 51
Guest, Configuration
View all TP-Link EAP110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
EAP Controller User Guide Chapter 5 AP Details 5.3 Guest The Guest tab displays the information of clients connecting to the EAP wireless network with the Portal authentication, including their MAC addresses and connected SSID. You can click authentication for it. to cancel the 5.4 Configuration The Configuration tab allows you to modify this AP's name, set the IP address, select the radio mode, enable the load balance function, set new SSID overriding the old one, enable Rogue AP detection feature, and forget this AP. All the configurations on this AP will only take effect on this device. 5.4.1 Basic Config You can change the name of this EAP. 47
EAP Controller
User Guide
Chapter 5 AP Details
47
5.3
Guest
The Guest
tab displays the information of clients
connecting to the EAP wireless network with
the Portal
authentication, including their MAC addresses and connected SSID. You can click
to cancel the
authentication for it.
5.4
Configuration
The Configuration tab allows you to modify this AP’s name, set the IP address, select the radio mode,
enable the load balance function, set new SSID overriding the old one, enable Rogue AP detection feature,
and forget this AP. All the configurations on this AP will only take effect on this device.
5.4.1
Basic Config
You can change the name of this EAP.