TP-Link Archer C7 Archer C7 V3 User Guide US - Page 15
Panel Layout
View all TP-Link Archer C7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Archer C7 AC1750 Wireless Dual Band Gigabit Router 1.4 Panel Layout 1.4.1 The Front Panel Figure 1-1 LEDs on the front panel The router's LEDs are located on the front panel (View from left to right). Name Status Indication (Power) (System) (Wireless 2.4GHz) (Wireless 5GHz) (Ethernet) (Internet) Off Power is off. On On Flashing Off Power is on. The router is initializing or maybe has a system error. The router is working properly. The router has a system error. Off Flashing Off Flashing Off On Flashing The wireless function is disabled. The wireless function is enabled. The router is working on 2.4GHz radio band. The wireless function is disabled. The wireless function is enabled. The router is working on 5GHz radio band. There is no device linked to the corresponding port. There is a device linked to the corresponding port but there is no activity. There is an active device linked to the corresponding port. (WPS) Slow Flash On Quick Flash A wireless device is connecting to the network by WPS function. This process will last in the first 2 minutes. A wireless device has been successfully added to the network by WPS function. A wireless device failed to be added to the network by WPS function. (USB on Off No storage device or printer is plugged into the USB port. the rear panel) On A storage device or printer has connected to the USB port. Table 1-1 The LEDs Description - 4 -