TP-Link Archer BE9300 Archer BE550US V1.6 Quick Installation Guide - Page 1
TP-Link Archer BE9300 Manual
![]() |
View all TP-Link Archer BE9300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
1 Connect the Hardware • Keep the router vertical while working. • Refer to Q4 of Need Help to place the router for optimal Wi-Fi performance. *Images may differ from your actual products. 1 Connect the powered-off modem to the router's 2.5 Gbps WAN port with an Ethernet cable. Internet 2 Power on the modem, and then wait about 2 minutes for it to restart. 4 Wait until the LED is solid on (LED Exclamation Point or Or All LEDs) 3 Connect the power adapter to the router. Then press the Power button to turn it on. 2 Set Up the Network Method ONE: Via the TP-Link Tether App 1. Download the Tether app. or Scan for Tether Tether 2. Open the Tether app and log in with your TP-Link ID. Note: If you don't have an account, create one first. 3. Tap the button in the Tether app and select Wireless Router > Archer BE550/BE9300. Follow the steps to complete the setup and connect to the internet. Choose Your Device Type Wireless Router Gaming Router Range Extender To enjoy a more complete service from TP-Link, bind your TP-Link ID to the router. Method TWO: Via a Web Browser 1. Connect your device to the router wirelessly or with an Ethernet cable. Wireless Password/PIN:XXXXXXXX SSID:TP-Link_XXXX SSID:TP-Link_XXXX_5G SSID:TP-Link_XXXX_6G The default wireless network names (SSIDs) and password are printed on the label at the back of the router. 2. Launch a web browser and enter http://tplinkwifi.net or http://192.168.0.1 in the address bar. Create a password to log in. http://tplinkwifi.net New Password: Confirm Password: Let's Get Started Note: If the login window does not appear, please refer to Q1 of Need Help in this guide. 3. Follow the step-by-step instructions to set up the internet connection and register for the TP-Link Cloud service. LED Explanation You can check the router's working status by following the LED Explanation. Cycling The system is starting up or the router is being upgraded. Do not disconnect or power off your router. Solid All LEDs The router is working normally. Blinking Top 10 LEDs Establishing a WPS connection. Solid The router is disconnected from LED Exclamation Point the internet. Blinking The router is disconnected from LED Exclamation Point the internet, and Wi-Fi is off. Blinking All LEDs Wi-Fi is off. Off Power is off or the LED is turned off. Button Explanation Three physical buttons are located on the front of the router. WPS Button Wi-Fi Button LED Button Press the WPS button, and immediately press the WPS button on your client device to start the WPS process. Press and hold this button for about 2 seconds to turn on or off the wireless function of your router. Press the LED button to turn on or off the LED of your router.
![](/manual_guide/products/tplink-archer-be550-archer-be550us-v16-quick-installation-guide-9bf9b98/1.png)