TASCAM M-164 Owners Manual - Page 23

Using the internal effects (M-164FX and M-164UF) M-164FX and M-164UF units have an internal effects capability that allows the use of an effect without connecting an external effect unit. These internal effects can be applied by sending signals from channels 1-6, 7-8 and 9-10 to the AUX 2 bus. The return signal can be sent to channels 13-14 or 15-16. CH 1-6 7-8 9-10 AUX 2 knob AUX MASTER 2 knob Internal effects Return signal CH 13-14 or CH 15-16 1 Use the AUX 2 knob of each channel to adjust the level of the channel signal sent to the effects. 2 Use the AUX MASTER 2 knob to adjust the overall level of the signal sent to the effects. 4 − Using the mixer No. Effect name 1 Hall 1 2 Hall 2 3 Room 1 4 Room 2 5 Room 3 6 Plate 1 7 Plate 2 8 Plate 3 9 Chorus 10 Flange 11 Delay 1 12 Delay 2 13 Chorus/Room 1 14 Chorus/Room 2 15 Vocal Cancel 16 Rotary Speaker Description Bright hall reverb suitable for drums, guitars and vocals Warm hall reverb suitable for acoustic guitars, pianos and vocals Simulation of a room with hardwood walls and floor suitable for acoustic instruments Ambience suitable for acoustic mixes and synth sounds Warm room sound suitable for guitars and rhythm instruments Classic plate reverb suitable for lead vocals and lead instruments Bright and showy plate reverb suitable for vocals and drums Short vintage plate reverb suitable for snare drums and guitars Stereo chorus suitable for guitars and pianos Stereo flanger creates a jet-like sound 125-ms slapback delay suitable for vocals and guitars 190-ms delay suitable for percussive arpeggios Chorus/reverb suitable for guitars, synths and pianos Autowah guitar effect with reverb suitable for lead instruments Effect that reduces the lead vocals from commercial CDs and other sources Emulation of a rotary speaker suitable for organs and guitars 3 Use the EFFECT section rotary knob to select the effect type. The effect types are explained in the list below by their corresponding numbers. TASCAM M-164/M-164FX/M-164UF 23