Stihl TS 700 STIHL Cutquik Instruction Manual - Page 3

© ANDREAS STIHL AG & Co. KG, 2011 0458-376-8621-B. M0-3.C11.DDS. 0000000701_003_GB Printed on chlorine-free paper Printing inks contain vegetable oils, paper can be recycled. Original Instruction Manual Contents Guide to Using this Manual 2 Safety Precautions and Working Techniques 3 Sample applications 16 Cutting wheels 19 Composite resin cutting wheels 19 Diamond cutting wheels 19 Assembling the bearing and guard 23 Tensioning the ribbed V-belt 26 Fitting / replacing an abrasive wheel 26 Fuel 27 Fueling 28 Starting / Stopping the Engine 29 Air Filter System 31 Engine Management 32 Adjusting the Carburetor 32 Spark Arresting Screen in Muffler 34 Checking the Spark Plug 34 Replacing the Starter Rope and Rewind Spring 35 Replacing the V-belt 37 Cut-off machine cart 37 Storing the Machine 38 Maintenance and Care 39 Main Parts 41 Specifications 44 Special Accessories 45 Maintenance and Repairs 45 STIHL Incorporated Federal Emission Control Warranty Statement 46 Trademarks { TS 700, TS 800 English 48 Allow only persons who fully understand this manual to operate your cut-off machine. To receive maximum performance and satisfaction from your STIHL cut-off machine, it is important that you read, understand and follow the safety precautions and the operating and maintenance instructions in chapter "Safety Precautions and Working Techniques" before using your cut-off machine. For further information you can go to www.stihlusa.com Contact your STIHL dealer or the STIHL distributor for your area if you do not understand any of the instructions in this manual. Warning! Because a cut-off machine is a highspeed cutting tool, some special safety precautions must be observed to reduce the risk of personal injury. Careless or improper use may cause serious or even fatal injury. 1