Stihl TS 480i STIHL Cutquik174 Product Instruction Manual - Page 3

Contents English Original Instruction Manual Printed on chlorine-free paper Printing inks contain vegetable oils, paper can be recycled. Guide to Using this Manual 2 Safety Precautions and Working Techniques 3 Sample applications 16 Cutting wheels 20 Composite resin cutting wheels 20 Diamond cutting wheels 21 Electronic water control 24 Assembling the cast arm and guard 25 Tensioning the ribbed V-belt 29 Fitting / replacing an abrasive wheel 29 Fuel 31 Fueling 31 Starting / Stopping the Engine 33 Air Filter System 34 Engine Management 35 STIHL Injection 35 Spark Arresting Screen in Muffler 36 Spark Plug 36 Rewind Starter 37 Replacing the V-belt 38 Cut-off machine cart 39 Storing the Machine 39 Maintenance and Care 40 Main Parts 42 Specifications 44 Maintenance and Repairs 45 Disposal 45 STIHL Incorporated Federal Emission Control Warranty Statement 46 { TS 480i, TS 500i Trademarks 48 Allow only persons who fully understand this manual to operate your cut-off machine. To receive maximum performance and satisfaction from your STIHL Cutquik cut-off machine, it is important that you read, understand and follow the safety precautions and the operating and maintenance instructions in the chapter "Safety Precautions and Working Techniques" before using your cut-off machine. For further information you can go to www.stihlusa.com Contact your STIHL dealer or the STIHL distributor for your area if you do not understand any of the instructions in this manual. WARNING Because a cut-off machine is a highspeed cutting tool, some special safety precautions must be observed to reduce the risk of personal injury. Careless or improper use may cause serious or even fatal injury. This instruction manual is protected by copyright. All rights reserved, especially the rights to reproduce, translate and process with electronic systems. 1 © ANDREAS STIHL AG & Co. KG, 2015 0458-753-8621-B. VA9.E15. 0000006169_010_GB