Stihl TS 420 A EWC STIHL Cutquik Product Instruction Manual - Page 32
Fueling
View all Stihl TS 420 A EWC STIHL Cutquik manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
370BA017 KN 370BA018 KN 370BA019 KN English Fueling Close the fuel filler cap 1. Before fueling, clean the fuel filler cap and the area around it so that dirt cannot fall into the tank. Thoroughly shake up the mixture in the canister before fueling your machine. To avoid the risk of burns or other injuries due to escaping gasoline vapors, open the fuel filler cap carefully so that any excess pressure in the tank can escape slowly. Never use a tool to open the bayonet catch. This could damage the cap and cause fuel to leak out. Do not spill any fuel and do not fill the tank up to the brim. 2. N Fit the cap and turn it until it engages in the bayonet mount. N Press the cap down with your hand as far as possible and turn it clockwise (approx. 1/8 turn) until it engages completely. Open the fuel filler cap 1. 2. Change the fuel pickup body every year N Drain the fuel tank. N Pull the fuel pickup body out of the tank with a hook and disconnect it from the hose. N Connect a new fuel pickup body to the hose. N Return the fuel pickup body to the tank. Press the cap down with your hand as far as possible, turn it counterclockwise (approx. 1/8 turn) and remove it. 30 TS 410, TS 420