Stihl SR 430 Instruction Manual - Page 17
Assembling the Unit - accessories
![]() |
View all Stihl SR 430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
WARNING Never test the ignition system with the boot removed from the spark plug or with a removed spark plug, since uncontained sparking may cause a fire. WARNING Do not operate your power tool if the muffler is damaged, missing or modified. An improperly maintained muffler will increase the risk of fire and hearing loss. Your muffler is equipped with a sparkarresting screen to reduce the risk of fire; never operate your power tool if the screen is missing, damaged or clogged. Remember that the risk of a brush or forest fire is greater in hot or dry weather. In California, it is a violation of § 4442 or § 4443 of the Public Resources Code to use or operate gasoline-powered tools on forest-covered, brush-covered or grass-covered land unless the engine's exhaust system is equipped with a complying spark arrester that is maintained in effective working order. The owner/operator of this product is responsible for properly maintaining the spark arrester. Other states or governmental entities/agencies, such as the U.S. Forest Service, may have similar requirements. Contact your local fire agency or forest service for the laws or regulations relating to fire protection requirements. Tighten all nuts, bolts and screws except the carburetor adjustment screws after each use. For maintenance items please also refer to the maintenance chart in this instruction manual. Store the power tool in a dry and high or locked location out of reach of children. Before storing for longer than a few days, always empty the fuel tank. See chapter "Storing the machine" in this instruction manual. Store fuel in an approved and properly labeled safety-type canister only. Take care when handling gasoline! For health and safety reasons, avoid direct contact with the skin and avoid inhaling fuel vapor! English Assembling the Unit NOTICE Hose and throttle cable, and the metering unit's operating cable on the SR 450, come connected ready for use and must not be kinked while assembling the machine. The combination wrench and screwdriver are in the supplied accessory bag. Fitting the pleated hose on the blower tube 1 2 N Push wide hose clamp (1), marks facing right, onto the blower tube (2). 0002BA073 KN SR 430, SR 450 15
![](/manual_guide/products/stihl-sr-430-instruction-manual-341f30b/17.png)