Stihl SH 55 Instruction Manual - Page 20

Engine Management, Adjusting the Carburetor

Page 20 highlights

English Engine Management Adjusting the Carburetor 43 Exhaust emissions are controlled by the design of the fundamental engine parameters and components (e.g. carburation, ignition, timing and valve or port timing) without the addition of any major hardware. General Information The carburetor comes from the factory with a standard setting. This setting provides an optimum fuel-air mixture under most operating conditions. Preparations 295BA046 KN N Take the filter (3) out of the filter housing (4). N Install a new filter. As a temporary measure you can knock it out on the palm of your hand or blow it out with compressed air - do not wash. Replace any damaged parts. N Fit the filter (3) in the filter housing (4). N Fit the filter cover (2) so that it snaps into position. N Shut off the engine. N Check the air filter and clean or replace if necessary. N Check the spark arresting screen (not in all models, country-specific) in the muffler and clean or replace if necessary. 18 BG 55, BG 65, BG 85, SH 55, SH 85

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76

BG 55, BG 65, BG 85, SH 55, SH 85
English
18
N
Take the filter (3) out of the filter
housing (4).
N
Install a new filter. As a temporary
measure you can knock it out on the
palm of your hand or blow it out with
compressed air – do not wash.
Replace any damaged parts.
N
Fit the filter (3) in the filter
housing (4).
N
Fit the filter cover
(2) so that it snaps
into position.
Exhaust emissions are controlled by the
design of the fundamental engine
parameters and components (e.g.
carburation, ignition, timing and valve or
port timing) without the addition of any
major hardware.
General Information
The carburetor comes from the factory
with a standard setting.
This setting provides an optimum fuel-air
mixture under most operating
conditions.
Preparations
N
Shut off the engine.
N
Check the air filter and clean or
replace if necessary.
N
Check the spark arresting screen
(not in all models, country-specific)
in the muffler and clean or replace if
necessary.
4
295BA046 KN
3
Engine Management
Adjusting the Carburetor