Stihl MS 880 R MAGNUM Product Instruction Manual - Page 32

English 1 N if engine trouble occurs, first check whether use of intake air preheating is necessary N at higher temperatures, close the opening with stoppers (1) (special accessory) 171BA003 KN 001BA140 KN Starting / Stopping the Engine Positions of the Master Control lever STOP 0 Stop 0 - engine off - ignition is switched off Operating position F - engine is running or can start Warm start n - this position is for starting the warm engine - the Master Control lever returns to the operating position when the throttle trigger is squeezed Cold start l - this position is for starting the cold engine Adjust Master Control lever The throttle trigger interlock and throttle trigger must be pressed simultaneously to adjust the Master Control lever from operating position F to starting acceleration n or choke shutter closed l. Position choke shutter closed l - If engine is cold - if the engine stalls during opening of throttle after starting - the fuel tank has run empty (engine stalled out) Position starting acceleration n - if engine is warm (once the engine has been running for approx. one minute) - when engine begins to fire - after ventilation of the combustion chamber, if the engine was flooded Holding the chain saw There are two ways to hold the chain saw during starting. 30 MS 880