Stihl MS 441 C-MQ MAGNUM Product Instruction Manual - Page 31

Closing English 001BA232 KN 001BA234 KN 001BA226 KN 001BA233 KN N To correct a misalignment, turn the cap (with the grip up) until it drops fully into the tank opening. N Twist the cap counterclockwise as far as it will go (approx. 1/4 turn) - this will twist the base of the cap into the correct position. N Twist the cap clockwise, closing it normally - see the sections "Closing" and "Checking for proper closure." N If your cap still does not tighten properly, it may be damaged or broken; immediately stop use of the unit and take it to your authorized STIHL dealer for repair. Filler cap with markings and symbols N Twist filler cap counterclockwise (approx. 1/4 turn). Markings on filler cap and housing must align. 001BA234 KN Handle is in an upright position: N Position filler cap - markings on filler cap and housing must align. N Push the filler cap down as far as it will go. N Push the filler cap down and twist it clockwise until it engages. 001BA237 KN Opening N Raise handle. 001BA236 KN N Remove the filler cap. Refueling Take care not to spill fuel while fueling and do not overfill the tank - leave approx. 1/2" (13 mm) air space. Then the markings on filler cap and housing will align. MS 441 C-M 29 001BA231 KN