Stihl MS 362 C-Q Product Instruction Manual - Page 55

Specifications

Get Stihl MS 362 C-Q PDF manuals and user guides View all Stihl MS 362 C-Q manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

Specifications EPA / CEPA The Emission Compliance Period referred to on the Emissions Compliance Label indicates the number of operating hours for which the engine has been shown to meet Federal emission requirements. Category A = 300 hours B = 125 hours C = 50 hours Engine STIHL single cylinder two-stroke engine Displacement: 3.6 cu. in. (59 cm3) Bore: 1.85 in. (47 mm) Stroke: 1.34 in. (34 mm) Engine power to 4.6 hp (3.4 kW) at ISO 7293: 9,500 rpm Idle speed: 2,800 rpm Max. permissible engine speed with bar and chain: 14,000 rpm Ignition System Fuel System All position diaphragm carburetor with integral fuel pump Fuel tank capacity: 20.3 fl.oz (0.60 l) Chain Lubrication Fully automatic, speed-controlled oil pump with rotary piston. Additional manual oil flow control Oil tank capacity: 11.0 fl.oz. (0.325 l) Weight dry, without bar and chain MS 362 C: 13.0 lbs (5.9 kg) Cutting Attachment Recommended cutting attachments complying with Section 5.11 of ANSI B 175.1-2000. Observe notes on ANSI B 175.1-2000 and definition of "reduced kickback chain" in chapter on "Safety Precautions". Electronic magneto ignition Spark plug (resistor Bosch WSR 6 F, type): NGK BPMR 7 A Electrode gap: 0.02 in. (0.5 mm) English 3/8" chains Reduced kickback STIHL saw chains (with green label) Rapid Super C3 (33 RSC3) Rapid Super C3 (36 RSC3) Rapid Micro C3 (33 RMC3) Rapid Micro C3 (36 RMC3) Pitch: 3/8" (9.32 mm) Drive link gauge: 0.050 in. (1.3 mm)/0.063 in. (1.6 mm) Rollomatic E guide bars with sprocket nose Reduced kickback STIHL guide bar (with green label) Bar lengths 16, 18, 20, 25 in (40, 45, (3/8"): 50, 63 cm) Groove width: 0.050 in. (1.3 mm)/0.063 in. (1.6 mm) Other yellow-labeled chains and bars for this powerhead: STIHL saw chain (with yellow label) Rapid Micro Comfort (33 RMC) Rapid Micro Comfort (36 RMC) Rapid Super Comfort (33 RSC) Rapid Super Comfort (36 RSC) Pitch: 3/8" (9.32 mm) Drive link gauge: 0.050 in. (1.3 mm)/0.063 in. (1.6 mm) MS 362 C 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
MS 362 C
English
53
EPA / CEPA
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category
Engine
STIHL single cylinder two-stroke engine
Ignition System
Electronic magneto ignition
Fuel System
All position diaphragm carburetor with
integral fuel pump
Chain Lubrication
Fully automatic, speed-controlled oil
pump with rotary piston. Additional
manual oil flow control
Weight
Cutting Attachment
Recommended cutting attachments
complying with Section 5.11 of ANSI B
175.1-2000.
Observe notes on ANSI B 175.1-2000
and definition of "reduced kickback
chain" in chapter on "Safety
Precautions".
3/8" chains
Rollomatic E guide bars with
sprocket nose
Other yellow-labeled chains and bars
for this powerhead:
Specifications
A = 300 hours
B = 125 hours
C = 50 hours
Displacement:
3.6 cu. in. (59 cm
3
)
Bore:
1.85 in. (47 mm)
Stroke:
1.34 in. (34 mm)
Engine power to
ISO 7293:
4.6 hp (3.4 kW) at
9,500 rpm
Idle speed:
2,800 rpm
Max. permissible
engine speed with
bar and chain:
14,000 rpm
Spark plug (resistor
type):
Bosch WSR 6 F,
NGK BPMR 7 A
Electrode gap:
0.02 in. (0.5 mm)
Fuel tank capacity:
20.3 fl.oz (0.60 l)
Oil tank capacity:
11.0 fl.oz. (0.325 l)
dry, without bar and chain
MS 362 C:
13.0 lbs (5.9 kg)
Reduced kickback STIHL saw chains
(with green label)
Rapid Super C3 (33 RSC3)
Rapid Super C3 (36 RSC3)
Rapid Micro C3 (33 RMC3)
Rapid Micro C3 (36 RMC3)
Pitch:
3/8" (9.32 mm)
Drive link gauge:
0.050 in.
(1.3 mm)/0.063 in.
(1.6 mm)
Reduced kickback STIHL guide bar
(with green label)
Bar lengths
(3/8"):
16, 18, 20, 25
in (40, 45,
50, 63 cm)
Groove width:
0.050 in.
(1.3 mm)/0.063 in.
(1.6 mm)
STIHL saw chain (with yellow label)
Rapid Micro Comfort (33 RMC)
Rapid Micro Comfort (36 RMC)
Rapid Super Comfort (33 RSC)
Rapid Super Comfort (36 RSC)
Pitch:
3/8" (9.32 mm)
Drive link gauge:
0.050 in. (1.3
mm)/0.063 in.
(1.6 mm)