Stihl MS 360 C Instruction Manual - Page 29
Go to Tensioning the Saw Chain
View all Stihl MS 360 C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
english / USA 6 9 77 8 10 001BA109 KN 001BA108 KN 143BA034 KN : Unscrew the nuts and take off the chain sprocket cover. 4 5 : Turn screw (4) counterclockwise until the tensioner slide (5) butts against left end of housing slot. 001BA107 KN : Pull the hand guard (6) back toward the front handle. : Press down the throttle trigger interlock to release the chain brake. Wear work gloves to protect your hands from the sharp cutters. : Fit the chain - start at the bar nose. 143BA003 KN : Fit the guide bar over the studs (7) - cutting edges on top of bar must point to right - and engage the peg of the tensioner slide in locating hole (8) -- place the chain over sprocket (9) at the same time. : Now turn tensioning screw (10) clockwise until there is very little chain sag on the underside of the bar -- and the drive link tangs are located in the bar groove. : Refit the sprocket cover - and screw on the nuts only fingertight. : Go to "Tensioning the Saw Chain". 28 MS 360 C