Stihl MS 291 C-Q Instruction Manual - Page 46
Replacing the Starter Rope, and Rewind Spring
View all Stihl MS 291 C-Q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
213BA018 KN English Replacing the Starter Rope and Rewind Spring Remove the fan housing N Remove the shroud - see "Shroud" 1 1 5902BA028 KN 1 1 N Remove screws (1) N Push hand guard upward N Pull the bottom of the fan housing away from the crankcase and remove downwards Remove the rope rotor For standard versions The rewind spring can jump out - risk of injury! For versions with Easy2Start If appropriate circlip pliers are not available, have the starter rope and/or rewind spring replaced by a servicing dealer. 4 3 2 1 N Carefully remove the circlip (1)using the circlip pliers N Remove the washer (2), carrier (3) and spring housing (4) 1 2 3 3 5902BA017 KN Replacing a torn starter rope For standard versions N Remove remaining rope from the rotor and starter grip N Thread the new starter rope through the starter grip and secure it by making a knot N Pull the knot into the starter grip For versions with Easy2Start N Remove remaining rope from the rotor and starter grip 5902BA018 KN 2 3 1 N Carefully press the spring clip (1) off of the axle with a screwdriver or suitable pliers N Carefully remove the rope rotor with washer (2) and pawl (3) 2710BA004 KN N Carefully press the spring clip (1) off of the axle with a screwdriver or suitable pliers N Carefully remove the rope rotor with washer (2) and pawls (3) The rewind spring can jump out - risk of injury! N Thread the new starter rope through the starter grip and secure it by making a knot 151BA021 KN 44 MS 291 C-Q