Stihl MS 290 Product Instruction Manual - Page 58
Cutting Attachment
View all Stihl MS 290 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
English / USA Cutting Attachment Recommended cutting attachments for compliance with § 5.11 of ANSI Standard B 175.1-2000 (see page 13 of this Manual): MS 290: STIHL reduced kickback bar (with green label) for 0.325" and 3/8" pitch: Rollomatic with sprocket nose 16, 18 or 20 in (40, 45 or 50 cm) STIHL low kickback chain1) (with green label): for 0.325" (8.25 mm) pitch: Rapid-Micro C3 (23 RMC3, 26 RMC3) for 3/8" (9.32 mm) pitch: Rapid-Super C3 (33 RSC3, 36 RSC3) Chain sprocket: 7-tooth for 0.325" pitch 8-tooth for 0.325" pitch 7-tooth for 3/8" pitch (spur sprocket) MS 310: STIHL reduced kickback bar (with green label) for 3/8" pitch: Rollomatic with sprocket nose 16, 18 or 20 in (40, 45 or 50 cm) STIHL low kickback chain1) (with green label): for 3/8" (9.32 mm) pitch: Rapid-Micro C3 (33 RSC3, 36 RSC3) Chain sprocket: 7-tooth for 3/8" pitch (spur sprocket) MS 390: STIHL reduced kickback bar (with green label) for 3/8" (9.32 mm) pitch: Rollomatic with sprocket nose 16, 18 or 20 in (40, 45 or 50 cm) STIHL low kickback chain1) (with green label): for 3/8" (9.32 mm) pitch: Rapid-Super C 3 (33 RSC3, 36 RSC3) Chain sprocket: 7-tooth for 3/8" pitch (spur sprocket) In order to comply with the kickback performance requirements of § 5.11 of ANSI Standard B 175.1-2000, do not use replacement saw chain unless it has been designated as meeting the ANSI § 5.11 requirements on this specific powerhead, or has been designated as "low kickback" saw chain1) in accordance with the ANSI B 175.1-2000 standard. 1) See definition of "low kickback chain" on page 16 of this Manual. Since new bar/chain combinations may be developed after publication of this Manual, ask your STIHL dealer for the latest STIHL recommendations. Other bars and chains available for this powerhead are: STIHL yellow-labeled bars: MS 290 For 0.325" (8.25 mm) and 3/8" (9.32 mm) pitch: Rollomatic "S" with sprocket nose 16, 18 or 20 in (40, 45 or 50 cm) Duromatic with stellite tipped nose 16, 18 or 20 in (40, 45 or 50 cm) MS 310 For 3/8" pitch: Rollomatic "S" with sprocket nose 16, 18, 20, 25 or 30 in (40, 45, 50, 63 or 70 cm) Duromatic with stellite tipped nose 16, 18, 20 or 25 in (40, 45, 50 or 63 cm) MS 390 For 3/8" pitch: Rollomatic "S" with sprocket nose 16, 18, 20, 25 or 30 in (40, 45, 50, 63 or 70 cm) Duromatic with stellite tipped nose 16, 18, 20 or 25 in (40, 45, 50 or 63 cm) STIHL yellow-labeled chains: MS 290 For 0.325" pitch: Rapid Micro C (23 RMC, 25 RMC, 26 RMC) For 3/8" pitch: Rapid Micro (33 RM, 35 RM, 36 RM) Rapid-Super C (33 RSC, 35 RSC, 36 RSC) MS 310 For 3/8" pitch: Rapid-Micro (33 RM, 35 RM, 36 RM) Rapid-Super C (33 RSC, 35 RSC, 36 RSC) MS 390 For 3/8" pitch: Rapid-Micro (33 RM, 35 RM, 36 RM) Rapid-Super C (33 RSC, 35 RSC, 36 RSC) MS 290, MS 310, MS 390 57