Stihl MS 261 C-Q Product Instruction Manual - Page 46
Models with ElastoStart, Models with Easy2Start, All models - m q pris
View all Stihl MS 261 C-Q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
English Models with ElastoStart All models 151BA021 KN 5902BA019 KN N Pry the cap out of the starter grip. N Remove the remaining rope from the rotor and starter grip. N Thread the new rope through the starter grip and tie one of the knots shown. 1 2 3 146BA018 KN N Thread the new rope through the starter grip and tie a simple overhand knot. N Pull the knot back into the grip. N Refit the cap in the grip. Models with Easy2Start N Remove the remaining rope from the rotor and starter grip. N Thread the end of the rope through the top of the guide bushing (1) and rope rotor (2) and secure it with a simple overhand knot. N Coat the rope rotor bearing bore with non-resinous oil. N Slip the rotor over the starter post (3) - turn it back and forth to engage the anchor loop of the rewind spring. 5902BA021 KN 44 MS 261 C-Q