Stihl MS 192 T Product Instruction Manual - Page 26
Chain Lubricant
View all Stihl MS 192 T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
English Checking for proper closure Chain Lubricant N The lug on the grip must engage entirely in the recess (arrow), and the grip must lie completely flush with the top of the cap. N Grip the cap and check for tightness. N If the cap can be moved, it is not properly installed. Misalignment of the cap parts N If the cap does not drop fully into the opening when the positioning marks line up and/or if the cap does not tighten properly when twisted, the base of the cap may be rotated out of position vis-à-vis the top. N Such misalignment can result from handling, cleaning or an improper attempt at tightening. 001BA225 KN 001BA223 KN Left: Right: Base of improperly aligned cap (with open space) Base of cap correctly positioned for installation N To correct a misalignment, turn the cap (with the grip up) until it drops fully into the tank opening. N Twist the cap counterclockwise as far as it will go (approx. 1/4 turn) - this will twist the base of the cap into the correct position. N Twist the cap clockwise, closing it normally - see the sections "Closing" and "Checking for proper closure." N If your cap still does not tighten properly, it may be damaged or broken; immediately stop use of the unit and take it to your authorized STIHL dealer for repair. 001BA226 KN 001BA227 KN For automatic and reliable lubrication of the chain and guide bar - use only an environmentally compatible quality chain and bar lubricant. Rapidly biodegradable STIHL Bioplus is recommended. Biological chain oil must be resistant to aging (e.g. STIHL Bioplus) since it will otherwise quickly turn to resin. This results in hard deposits that are difficult to remove, especially in the area of the chain drive, clutch and chain. It may even cause the oil pump to seize. The service life of the chain and guide bar depends on the quality of the lubricant. It is therefore essential to use only a specially formulated chain lubricant. Do not use waste oil. Renewed contact with waste oil can cause skin cancer. Moreover, waste oil is environmentally harmful. Waste oil does not have the necessary lubricating properties and is unsuitable for chain lubrication. 24 MS 192 T, MS 192 TC