Stihl MS 181 Instruction Manual - Page 30
Mounting the Bar and Chain, side chain tensioner
View all Stihl MS 181 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
001BA187 KN English Mounting the Bar and Chain (side chain tensioner) Removing the chain sprocket cover Disengage the chain brake. 3 11 24 001BA186 KN N Unscrew the nut and remove the chain sprocket cover. 1 2 N Turn the screw (1) counterclockwise until the tensioner slide (2) butts against the left end of the housing slot. 001BA185 KN 533BA001 KN N Pull the hand guard towards the front handle until there is an audible click - the chain brake is disengaged. Fitting the chain WARNING Wear work gloves to protect your hands from the sharp cutters. N Fit the chain - start at the bar nose. 143BA003 KN N Fit the guide bar over the studs (1) - the cutting edges on the top of the bar must point to the right. N Engage the peg of the tensioner slide in the locating hole (2) -- place the chain over the sprocket (3) at the same time. N Turn the tensioning screw (4) clockwise until there is very little chain sag on the underside of the bar - and the drive link tangs are engaged in the bar groove. N Refit the sprocket cover and screw on the nut only fingertight. N Go to chapter on "Tensioning the Saw Chain" 28 MS 171, MS 181, MS 181 C, MS 211, MS 211 C