Stihl KM HT Instruction Manual - Page 14

English Cutting above obstacles Approved KombiEngines Assembling the Unit KombiEngines The machine's long reach makes it possible to prune branches that are overhanging obstacles, such as rivers or lakes. The tool angle in this case depends on the position of the branch. Cutting from a lift bucket 246BA017 A1 Only use KombiEngines supplied or explicitly approved by STIHL for use with the attachment. This KombiTool may be operated only in combination with the following KombiEngines: STIHL KM 56 R, KM 85 R, KM 91 R, KM 94 R, KM 111 R, KM 131 R, KMA 130 R, KMA 135 R WARNING Loop-handled machines must be equipped with a barrier bar. N Pull the protective caps off the ends of the drive tube and keep them in a safe place for later use - see "Storing the Machine". NOTICE The plug may come out of the drive tube when you pull off the cap. Push it back into the drive tube as far as stop. 413BA014 KN 002BA248 KN 246BA018 KN The machine's long reach enables cutting to be performed next to the trunk without the risk of the lift bucket damaging other branches. The tool angle in this case depends on the position of the branch. 12 HT-KM