Stihl KM HL Hedge Trimmer Instruction Manual - Page 16
Fitting the Harness
![]() |
View all Stihl KM HL Hedge Trimmer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
English 3 2 1 N Shut off the engine. N Fit the blade scabbard. N Pull back the sliding sleeve (1) and use the lever (2) to swing the joint upwards - in direction of drive tube - until the cutter bar is flat against the drive tube. N Release the sliding sleeve (1) and make sure the lock pin engages the quadrant (3). 0000-GXX-1686-A0 Fitting the Harness The type and style of the harness and carabiner (spring hook) depend on the market. Shoulder Strap 1 2 N Put on the shoulder strap (1). N Adjust the length of the strap so that the carabiner (2) is about a hand's width below your right hip. 002BA374 KN Full Harness 1 3 2 N Put on the full harness (1). N Adjust the length of the strap so that the carabiner (2) is about a hand's width below your right hip. N Close the locking plate (3). Attaching Machine to Harness 2 1 1 2 002BA307 KN 002BA308 KN N Attach the carabiner (1) to the carrying ring (2) on the drive tube - hold the carrying ring steady. 14 HL-KM
![](/manual_guide/products/stihl-hl-attachments-instruction-manual-5e04426/16.png)