Stihl KM FBD Bed Redefiner Instruction Manual - Page 14
Mounting the KombiTool, Starting / Stopping the, Engine
View all Stihl KM FBD Bed Redefiner manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
English 2 3 5 Mounting the KombiTool 2 1 9924BA011 KN N Line up the drive tube (3) in the gearbox (2) so that the lug (arrow) on the drive tube points vertically upwards when the depth wheel (5) is upright. N Tighten down the clamp screw firmly. N Push the lug (1) on the drive tube into the slot (2) in the coupling sleeve as far as stop. 3 002BA326 KN Starting / Stopping the Engine Starting the engine To start the engine, basically follow the instructions for use for the KombiEngine or basic power tool! 9926BA009 KN 002BA327 KN 9926BA010 KN 4 When correctly installed, the red line (3) (arrow point) must be flush with the end of the coupling sleeve. N Tighten down the star knob (4) firmly. Removing the KombiTool N Reverse the above sequence to remove the drive tube. N Place the machine on the ground in a secure position The blade must not touch the ground or any other objects - risk of accident! N Assume a firm stance - possibilities: standing, bending or kneeling N Press the machine firmly against the ground with the left hand - do not touch the control elements on the control handle while doing so - see instruction manual for the KombiEngine or basic power tool 12 FBD-KM