Stihl HT 56 C Instruction Manual - Page 27
Checking Chain Lubrication, Fitting the Harness, Starting / Stopping the, Engine
![]() |
View all Stihl HT 56 C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
English Checking Chain Lubrication The saw chain must always throw off a small amount of oil. NOTICE Never operate your machine without chain lubrication. If the chain runs dry, the whole cutting attachment will be irretrievably damaged within a very short time. Always check chain lubrication and the oil level in the tank before starting work. Every new chain has to be broken in for about 2 to 3 minutes. After breaking in the chain, check chain tension and adjust if necessary - see "Checking Chain Tension". 246BA027 KN 4907BA000 KN Fitting the Harness The type and style of the shoulder strap depend on the market. Shoulder strap 1 2 N Put on the shoulder strap (1). N Adjust the length of the strap. N With the power tool attached, the carabiner (2) must be at about the same height as your right hip. Starting / Stopping the Engine Versions with Easy2Start WARNING This machine is extremely simple and easy to start, even for children. To reduce the risk of serious or fatal injury: - do not allow children or other unauthorized persons to attempt to start or otherwise use the machine - never allow children or unauthorized persons access to the machine - never leave the machine unattended while working or during work breaks - after work, store in a safe, secure location out of the reach of children and other unauthorized persons Controls 31 4907BA001 KN HT 56 C 2 1 Throttle trigger lockout 2 Throttle trigger 25
![](/manual_guide/products/stihl-ht-56-c-instruction-manual-4053bdd/27.png)