Stihl HL 94 K 0176 Product Instruction Manual - Page 20
The gearbox gets hot during operation.
![]() |
View all Stihl HL 94 K 0176 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
0000-GXX-1686-A0 English WARNING To reduce the risk of injury, never touch the blades while making adjustments. 2 3 1 N Pull back the sliding sleeve (1) and use the lever (2) to adjust the joint by one or several holes. N Release the sliding sleeve (1) and make sure the lock pin engages the quadrant (3). Transport Position 0000-GXX-1684-A0 moving the cutter bar to the transport position or from the transport position to the normal working position. WARNING The gearbox gets hot during operation. To reduce the risk of burn injury, do not touch the gearbox. 3 2 1 N Shut off the engine. N Fit the blade scabbard. N Pull back the sliding sleeve (1) and use the lever (2) to swing the joint upwards - in direction of drive tube - until the cutter bar is flat against the drive tube. N Release the sliding sleeve (1) and make sure the lock pin engages the quadrant (3). 0000-GXX-1685-A0 The cutter bar can be folded flat against the drive tube and locked in position to save space during transportation. WARNING To reduce the risk of injury, always shut off the engine - depress stop switch - and fit the blade scabbard before 18 HL 94, HL 94 K
![](/manual_guide/products/stihl-hl-94-145176-product-instruction-manual-c875d57/20.png)