Stihl HL 90 K 0 Instruction Manual - Page 9
Important Adjustments, During Operation
![]() |
View all Stihl HL 90 K 0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
002BA246 KN English / USA Once the engine has started, immediately blip the throttle trigger, which should release the starting throttle and allow the engine to slow down to idle. !Warning! Your power tool is a one-person machine. Do not allow other persons in the general work area, even when starting. !Warning! To reduce the risk of injury from loss of control, do not attempt to "drop start" your power tool. !Warning! When you pull the starter grip, do not wrap the starter rope around your hand. Do not let the grip snap back, but guide the starter rope to rewind it properly. Failure to follow this procedure may result in injury to your hand or fingers and may damage the starter mechanism. Important Adjustments !Warning! To reduce the risk of personal injury from loss of control or contact with the running cutting tool, do not use your unit with incorrect idle adjustment. At correct idle speed, the cutting tool should not move. For directions on how to adjust idle speed, see the appropriate section of your instruction manual. If you cannot set the correct idle speed, have your STIHL dealer check your power tool and make proper adjustments and repairs. During Operation Holding and controlling the power tool Always hold the unit firmly with both hands on the handles while you are working. Wrap your fingers and thumbs around the handles. Place your left hand on hose grip of shaft and your right hand on rear grip and throttle trigger. This also applies to lefthanders. !Warning! Never attempt to operate your power tool with one hand. Loss of control of the power tool resulting in serious or fatal injury may result. To reduce the risk of cut injuries, keep hands and feet away from the cutting tool. Never touch a moving cutting tool with your hand or any other part of your body. 8 HL 90 K
![](/manual_guide/products/stihl-hl-90-k-0-instruction-manual-fbbb102/9.png)