Stihl HL 100 K 135 Product Instruction Manual - Page 32

English / USA

Get Stihl HL 100 K 135 PDF manuals and user guides View all Stihl HL 100 K 135 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

English / USA 249BA014 KN 249BA015 KN 249BA013 KN 6 : Thread the rope through the rotor and secure it with a simple overhand knot. : Coat rope rotor bearing bore with non-resinous oil. : Slip rotor over starter post - turn it back and forth to engage anchor loop of rewind spring. : Remove remaining rope from the rotor and grip. : Tie a simple overhand knot in the new rope (see "Specifications") and then thread it through the top of the grip and the rope bushing (6). 3 4 5 : Refit the pawl (5) in the rotor. : Fit the washer (4) on the starter post. : Use a screwdriver or suitable pliers to install spring clip (3) on starter post and engage it on the pawl's peg - the spring clip must point counterclockwise clockwise as shown in the illustration. : Go to "Tensioning the rewind spring". HL 100 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
31
HL 100
English / USA
:
Remove remaining rope from the
rotor and grip.
:
Tie a simple overhand knot in the
new rope
(see "Specifications") and
then thread it through the top of the
grip and the rope bushing (
6
).
:
Thread the rope through the rotor
and secure it with a simple
overhand knot.
:
Coat rope rotor bearing bore with
non-resinous oil.
:
Slip rotor over starter post – turn it
back and forth to engage anchor
loop of rewind spring.
:
Refit the pawl (
5
) in the rotor.
:
Fit the washer (
4
) on the starter
post.
:
Use a screwdriver or suitable pliers
to install spring clip (
3
) on starter
post and engage it on the pawl's peg
– the spring clip must point
counterclockwise clockwise as
shown in the illustration.
:
Go to "Tensioning the rewind
spring".
249BA014 KN
6
249BA015 KN
4
3
5
249BA013 KN