Stihl HL 100 135 Product Instruction Manual - Page 15
Assembling the Unit - hl 100 135
View all Stihl HL 100 135 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
English / USA Assembling the Unit 1 1 2 4 A 2 4 3 5 6 2 1 1 7 7 Mounting the Loop Handle Necessary on versions with long shaft and 135° adjustable cutter bar (not HL 75 K, HL 100 K). : Fit the square nuts (1) in the barrier bar (2) - the holes must line up. : Fit the clamp (3) in the loop handle (4) and place them both on the drive tube (5). : Place clamp (6) in position and fit the barrier bar (2) so that the holes line up. : Insert screws (7) and tighten them down moderately as far as stop against the barrier bar. : Align the loop handle (4) and move it to the most comfortable position. Distance A must not be more than 21.5 in (55 cm) (about 14 in (35 cm) is recommended). : Tighten down the screws (7) firmly. 389BA001 KN 389BA002 KN 389BA054 KN 14 HL 100