Stihl FSA 65 Product Instruction Manual - Page 24

English Winding line onto spool 3905BA020 KN 1 3 2 3 5 N Use green-coded nylon line with a diameter of 0.08 in (2.0 mm). N Cut two 8 ft (2.5 m) lengths of nylon line from the reel (special accessory). N Rotate the spool (2) counterclockwise until the two arrow points are in alignment. N Push the straight end of each line through one sleeve (5) in the mowing head (3) until you feel a noticeable resistance - and then continue pushing as far as stop. 3905BA019 KN N Hold the mowing head steady. N Rotate the spool counterclockwise until the shortest line is about 4 in (10 cm) long. N If necessary, cut the longer line to a length of about 4 in (10 cm). The mowing head is now full. Mounting the Mowing Head 6 8 7 9 N Turn the spool (2) clockwise until the two arrow heads line up - secure the spool in this position. N Insert the cap (1) in the spool (2), press it down as far as stop and turn it clockwise at the same time. N Turn the cap (1) as far as stop and tighten it down by hand. 3905BA022 KN 3905BA021 KN N Slip the mowing head (6) over the shaft (7) and engage hex recess (8) on the external hexagon (9). 22 FSA 65, FSA 85