Stihl FS 91 Instruction Manual - Page 23
Mounting the Loop Handle
![]() |
View all Stihl FS 91 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Swiveling the handlebar Transport position Mounting the Loop Handle Mounting Loop Handle with Barrier Bar English 4 2 0000-GXX-0513-A0 002BA098 KN 002BA099 KN 3 3 7 2 5 6 7 N Loosen the wing screw (3) and unscrew it until the handlebar (7) can be rotated. N Rotate the handlebar 90° counterclockwise and then swing the handles down. N Tighten down the wing screw (3) firmly. Working position N Reverse the sequence described above to swing the handles up and turn the handlebar clockwise. 1 1 N Fit the square nuts (1) in the barrier bar (2); the holes must line up. N Place the clamp (3) in the loop handle (4) and position them both against the drive tube (5). N Position the clamp (6) against the drive tube. N Place the barrier bar (2) in position as shown. N Line up the holes. N Insert the screws (7) in the holes and screw them into the barrier bar (2) as far as stop. N Go to "Securing the Loop Handle". FS 91, FS 91 R 21
![](/manual_guide/products/stihl-fs-91-instruction-manual-cb9b574/23.png)