Stihl FS 46 Product Instruction Manual - Page 32
may be used as an alternative to
View all Stihl FS 46 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
English Preparations N Shut off the engine. N Put the machine on the ground with 3 the mowing head facing up. 4 Removing remaining nylon line 3 Schnur/LINE 2 Schnur/LINE 1 1 2 681BA008 KN 681BA009 KN 681BA024 KN N Hold the mowing head steady. N Rotate the spool counterclockwise until the shortest line is about 4 in (10 cm). N If necessary, cut the longer line to a length of about 4 in (10 cm). The mowing head is now full. STIHL AutoCut 5-2 Always check the mowing head for signs of wear before replacing the nylon line. If there are signs of serious wear, replace the parts concerned or install a new mowing head. N Open the mowing head - hold it steady with one hand. N Turn the cap (1) counterclockwise. N Disengage the spool (2), take it out of the mowing head and remove the remaining line. Winding line onto spool A prewound spool (special accessory) may be used as an alternative to the following procedure. N Use green-coded nylon line with a diameter of 0.08 in (2.0 mm). N Cut two 10ft (3 m) lengths of nylon line from the reel (special accessory). N Insert the ends of each line (3) in the holes (4) in the spool. N Bend the ends of the lines over the edge of the holes to form a hook. 30 FS 45, FS 46