Stihl FG 2 Instruction Manual - Page 10
Sharpening, Sharpening the Master Cutter
![]() |
View all Stihl FG 2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
English Sharpening Sharpening the Master Cutter 5 6 2 3 4 56 1 3 7 21 : Turn the knurled nut (3) until the stop (4) butts against the back of the cutter to be sharpened (master cutter). : Then turn the knurled nut a little further until the side plate presses against the file and the stop bar (6) lifts about 0.1 to 0.2 mm away from the stop roller (5). : Turn the clamping lever (7) to the right - the saw chain is locked in position. Sharpen the master cutter with 2 to 3 firm strokes of the file, from the inside to the outside of the side plate. : After sharpening, the stop bar (1) should butt against the stop roller (2). If this is not the case, readjust the stop (3) slightly and move the chain up against it - check the stop position again. 564BA012 KN 564BA013 KN 20 FG 2
![](/manual_guide/products/stihl-fg-2-instruction-manual-6da1b23/10.png)