Stihl FC 96 Instruction Manual - Page 19

Fueling Opening the threaded filler cap English Starting / Stopping the Engine Controls 002BA447 KN 0000-GXX-0477-A0 Preparations 3 1 N Before fueling, clean the filler cap and the area around it to ensure that no dirt falls into the tank. Always thoroughly shake the mixture in the canister before fueling your machine. N Position the machine so that the filler cap is facing up. WARNING To reduce the risk of fire and personal injuries due to escaping fuel and vapor, remove the fuel filler cap carefully so that any excess pressure in the tank can escape slowly. Use the proper seasonal gasoline blend, i.e., winter blend in winter, summer blend in summer. 0000-GXX-0476-A0 N Turn the cap counterclockwise until it can be removed from the tank opening. N Remove the filler cap. Refueling Take care not to spill fuel while fueling and do not overfill the tank. Closing the threaded filler cap N Position cap. N Turn the cap clockwise as far as it will go and tighten it as securely as possible by hand. 002BA448 KN 2 1 Throttle trigger lockout 2 Throttle trigger 3 Stop switch with Run and Stop positions. Depress the stop switch (...) to switch off the ignition - see "Function of stop switch and ignition system". Function of stop switch and ignition system The ignition is switched off and the engine stopped when the stop switch is pressed. The stop switch returns automatically to the Run position when it is released: The ignition is switched on again after the engine stops - the engine is then ready to start. FC 96, FC 111 17