Stihl FC 100 Instruction Manual - Page 15
Adjusting the depth of cut
View all Stihl FC 100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
241BA001 KN 241BA002 KN 350BA022 KN English / USA 2 1 A Adjusting the depth of cut : Shut off the engine and wait for the cutting blade to come to a complete standstill. : Loosen wingnut (1) counterclockwise : Adjust wheel (2): Upwards to increase depth of cut (A). Downwards to reduce depth of cut (A). 2 3 B Adjust correctly The depth of cut varies, depending on unevenness of the ground, your height and the way you hold the edger. : Use the following procedure: Adjust the wheel (2) so that the cutting blade (3) just touches the ground or breaks the surface of the soil by no more than 0,2" (5 mm) (B) in the normal working position. Do not adjust the deflector! The deflector has been set by the manufacturer so that the arrow on the deflector and the open side point away from the operator. This ensures that cuttings and other debris will be directed away from the machine and operator. 14 FC 100