Stihl BR 700 X Instruction Manual - Page 15

0416BA009 KN 002BA655 KN 373BA003 KN Wear Mark on Nozzle Adjusting the Throttle Cable Fitting the Harness English The front end of the nozzle wears away due to abrasive ground contact during operation. The nozzle is subject to normal wear and tear and must be replaced when the wear mark is reached. Transport Aid When storing or transporting the machine: It may be necessary to correct the adjustment of the throttle cable after assembling the machine or after a prolonged period of operation. Adjust the throttle cable only when the unit is completely and properly assembled. N Set the throttle trigger to the full throttle position. N Carefully rotate the screw in the throttle trigger in the direction of the arrow until you feel initial resistance. Then rotate it another half turn in the same direction. N Adjust the harness straps so that the backplate fits snugly and securely against your back. A Adjust height B Adjust angle Tightening the harness straps N Secure the blower tube to the handle on the backplate with the hook and loop fastener. N Pull the ends of the straps downward. BR 700, BR 700 X 13