Stihl BGA 45 Instruction Manual - Page 19
Assembling the Blower, Inserting and Removing the Activation
View all Stihl BGA 45 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
0000-GXX-2268-A0 0000-GXX-2594-A0 12 Assembling the Blower To determine the blower's state of charge: 80-100% 60-80% 1 40-60% 20-40% 0-20% To mount the blower tube and nozzle: 2 3 1 4 5 6 English ► Press the push button (1) on the blower. The LEDs on the blower will glow or flash green for about 5 seconds and indicate the state of charge (see illustration). For example: If four green LEDs glow continuously: full charge. If one green LED is flashing: less than 20 % charge. 12 Assembling the Blower 12.1 Mounting the Blower Tube and Nozzle WARNING Make sure the activation key is removed before starting assembly. Never operate your blower without a properly mounted blower tube and nozzle, @ 5.7.4. Use only attachments supplied or expressly approved by STIHL, @ 5.5. ► Align the holes on the nozzle (2) with the lugs on the blower tube (3). ► Push the nozzle (1) onto the blower tube (4). The nozzle will engage with an audible click. Once the nozzle and blower tube are assembled, keep them connected during use and storage. ► Align the blower tube mounting lugs (6) with the grooves on the blower tube (5) and push the parts together. ► Rotate the blower tube toward the symbol until it stops. The blower tube should lock in position. 13 Inserting and Removing the Activation Key 13.1 Inserting the Activation Key WARNING To reduce the risk of severe personal injury from unintended activation, never store the activation key in the blower. 0458-719-8621-A 17