Sony VPL-FHZ66 Operating Instructions - Page 7
TWIN Twin Picture key, Combinations of input signals, BLANK key, MUTING key, VOLUME key, FREEZE key
View all Sony VPL-FHZ66 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
depending on the resolution of the input signal and when displaying two pictures. 1 Press the D ZOOM + key to display the digital zoom icon on the projected image. 2 Press the V/v/B/b keys to move the digital zoom icon to the point on the image you wish to enlarge. 3 Press the D ZOOM + key or the D ZOOM - key repeatedly to change the enlargement ratio. The image can be enlarged up to 4 times. Press the RESET key to restore the previous image. TWIN (Twin Picture) key You can project the images from two input signals on the screen as a main picture and subpicture at the same time. To switch between one and two pictures, press the TWIN key. One picture display TWIN key Two pictures display (A) Main picture (B) Subpicture You can select the image to project to the main picture. The subpicture is preset to source the signal input from INPUT A. INPUT A is only compatible with signals from computers. Combinations of input signals Main picture Subpicture INPUT B (DVI-D) INPUT C (HDMI) INPUT A (RGB) INPUT D (HDBaseT) Notes • When "Screen Aspect" (page 37) is set to "4:3," the two picture function is not available. • When displaying two pictures, the input signal icon does not appear in the input select window (page 17). • Picture settings set for one picture may not be reflected as two pictures. • When displaying two pictures, the ? (On) key, 1 (standby) key, INPUT key, and BLANK key are available. BLANK key Cuts off the image. Press again to restore the image. MUTING key Mutes the audio output. Press again to restore the previous volume. VOLUME key For adjusting the volume output from the audio output terminal of the projector. FREEZE key Pauses a projected image. Press again to restore the image. Use this key when inputting a computer signal. f Setting the energy-saving mode easily ECO MODE key Energy-saving mode can be set easily. Energy-saving mode consists of "With No Input," "With Static Signal" and "Standby Mode." 1 Press the ECO MODE key to display the ECO Mode menu. ECO Mode ECO User Sel Back 2 Press the V/v key or ECO MODE key to select "ECO" or "User" mode. ECO: Sets each mode to the optimum energy-saving value. • With No Input: Standby 7