Sony SRS-XB22 Help Guide - Page 32

4 Check that the (BLUETOOTH) indicator has switched from flashing to a steady light. When the speaker is connected to the computer, the (BLUETOOTH) indicator stays lit. 5 Click the speaker icon in the top-right of the screen and select [SRS-XB22] from [Output Device]. You can enjoy playing back music, etc. from your computer. Hint The procedure explained above is for guidance only. For details, refer to the operating instructions supplied with the computer. Up to 3 BLUETOOTH devices can be connected to the speaker at the same time. When one of the devices starts playing back while playing back music on another device, the speaker switches the output and starts outputting the sound from the new device (Multi-device connection). Note The pairing mode of the speaker is released after about 5 minutes and the (BLUETOOTH) indicator flashes slowly. However, when pairing information is not stored in the speaker, such as at the factory settings, the pairing mode is not released. If the pairing mode is released before finishing the process, repeat from step . Once BLUETOOTH devices are paired, there is no need to pair them again, except in the following cases: Pairing information has been deleted after repair, etc. The speaker is already paired with 8 devices and another device is to be paired. The speaker can be paired with up to 8 devices. If a new device is paired after 8 devices have already been paired, the device that was paired earliest is replaced by the new one. The pairing information with the speaker has been deleted from the BLUETOOTH device. The speaker is initialized. All pairing information will be deleted. If you initialize the speaker, it may not be able to connect your iPhone/iPod touch or computer. In this case, erase the pairing information of the speaker on your iPhone/iPod touch or computer, and then perform the pairing procedure again. The speaker can be paired with multiple devices, but can only play music from one paired device at a time. 32