Sony SDM-P82 Operating Instructions (primary manual) - Page 21
Specifications - 18 1 tft monitor
View all Sony SDM-P82 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Self-diagnosis function This monitor is equipped with a self-diagnosis function. If there is a problem with your monitor or computer(s), the screen will go blank and the 1 (power) indicator will either light up green or flash orange. If the 1 (power) indicator is lit in orange, the computer is in power saving mode. Try pressing any key on the keyboard or moving the mouse. 1 (power) indicator If the picture disappears from the screen and the 1 (power) indicator is green 1 Turn off the 1 (power) switch and disconnect the video signal cables from the monitor. 2 Turn the monitor on by pressing the 1 (power) switch. If all four color bars appear (white, red, green, blue), the monitor is working properly. Reconnect the video input cables and check the condition of your computer(s). If the color bars do not appear, there is a potential monitor failure. Inform your authorized Sony dealer of the monitor's condition. If the 1 (power) indicator lights up in orange Try pressing any key on the keyboard or moving the mouse. The computer's power saving mode is awaked and the 1 (power) indicator lights up in green, and the picture appears on the screen. Specifications LCD panel Panel type: a-Si TFT Active Matrix Picture size: 18.1 inch Input signal format RGB operating frequency* Horizontal: 28 - 92 kHz Vertical: 56 - 85 Hz Resolution Horizontal: Max.1280 dots Vertical: Max.1024 lines Input signal levels Analog RGB video signal 0.7 Vp-p, 75 Ω, positive SYNC signal TTL level, 2.2 kΩ, positive or negative (Separate horizontal and vertical, or composite sync) 0.3 Vp-p, 75Ω, negative (Sync on green) Digital RGB (DVI) signal: TMDS (Single link) Power requirements 100 - 240 V, 50 - 60 Hz, Max. 1.2 A Power consumption Max. 58 W Operating temperature 5 - 35 °C Dimensions (width/height/depth) Display (upright): Approx. 404 × 406 × 201 mm US (16 × 16 × 8 inches) (with stand) Approx. 404 × 332.6 × 86.2 mm (16 × 13 1/8 × 3 1/2 inches) (without stand) Mass Approx. 7.6 kg (16 lb 12 oz) (with stand) Approx. 6.3 kg (13 lb 14 oz) (without stand) Plug & Play DDC2B Accessories See page 7. * Recommended horizontal and vertical timing condition • Horizontal sync width duty should be more than 4.8% of total horizontal time or 0.8 µs, whichever is larger. • Horizontal blanking width should be more than 2.5 µsec. • Vertical blanking width should be more than 450 µsec. Design and specifications are subject to change without notice. 21