Sony RM-LP204 Primary User Manual - Page 15

Using the Lists Selecting a Sound Field If you selected the tape deck Move the easy scroll key to display the information about deck A or B. Note When the remote is programmed to control a non-Sony tape deck, the following may occur: - The information about deck B is not displayed and you cannot switch between tape deck A and B. - "TAPE A/B" is displayed and tape deck A and B switch automatically each time you press the easy scroll key, etc. If you selected the 2ND AUDIO source Move the easy scroll key to select the source of 2ND AUDIO, then press the key. Note Depending on the component you are using, the component may not have the "2ND AUDIO" function. For details, refer to the Operating Instructions supplied with your receiver. Do the procedure below to select a sound field from the sound field list. Note that the sound fields contained in each list will vary depending on the receiver. 1 Press SOUND FIELD. The sound field list appears. Stadium Game Jazz 2 Move the easy scroll key to select the sound field, then press the key to enter the selection. A display example CINEMA EX. A CINEMA EX. B CINEMA EX. C To turn off the sound field Move the easy scroll key to select either "2CH STEREO" or "A.F.D." in the sound field list in the display. 15