Singer ESP2 Magic Steam Press Instruction Manual - Page 14
Trouble Shooting
View all Singer ESP2 Magic Steam Press manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
TROUBLE SHOOTING Before taking the unit to a service center, please check the following list of common problems for your issue. PROBLEM Unit fails to steam. Power Indicator Light does not illuminate. Unit fails to steam. Power Indicator Light does illuminate. POSSIBLE CAUSE Unit is not plugged in. Household Circuit Breaker/ Ground Fault Interrupter has tripped or blown a fuse. Auto Shut-Off has engaged. Water Reservoir is empty. Unit is damaged or malfunctioning. Steam Burst output is weak or intermittent. Pressing Plate needs to be cleaned. SOLUTION Plug into electrical outlet. Reset Circuit Breaker/Ground Fault Interrupter, or replace fuse. If you need assistance, Contact a licensed electrician. Refer to Auto Shut-Off section on page 5 of this manual for proper procedure. Refill Water Reservoir using procedures on page 6-7 of this manual. Please contact our customer support department. Refer to Cleaning the Digital Fabric Steam Press section on page 11 of this manual for proper procedure. WARNING :If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person in order to avoid a hazard. 13