Singer 14SH654 Finishing Touch Instruction Manual 19 - Page 16
Singer 14SH654 Finishing Touch Manual
View all Singer 14SH654 Finishing Touch manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
• Turn the hand wheel toward you until the lower looper is at the far right. • Thread the looper area of the machine following the yellow color coded thread guides 4 - 7 . Note: Use the tweezers provided in the accessory set to aid in threading the looper. • /1 • ) 15) • Grasp the thread with the tweezers 4 cm (1-1/2 inches) from thread guide 7. • Place the thread with the point of the tweezers slightly under and to the left of threading guide 8. 0 • Pull the thread up and into thread guide 8. • Pass the thread behind and over the top end of left looper 9-A. • Then pull it downward gently so that it will slip into the slot in the looper 9-B. • Pick up the thread and pass it through the hole in the end of the looper 10 . Note : Use the tweezers provided in the accessory set to aid in threading the looper. • The thread should be positioned in the groove of the lower looper. • Pull about 10cm (4 inches) of thread through the looper and place it over the top of the upper looper and to the back of the throat plate. 9 -B -A •-* • rn 0 Ic 10) • I 15