Sharp XV-Z90U XV-Z90U Operation Manual - Page 14
Connecting to a DVD Player and DTV Decoder
View all Sharp XV-Z90U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Connecting to Video Equipment Projector Setup & Connections 1 1 S-video cable (commercially available) 2 To S-video output terminal Video cable (commercially available) 2 To video output terminal VCR, Laser disc player, DVD player or DTV decoder Connecting to a DVD Player and DTV Decoder Connecting to a DVD player and DTV decorder with Component output (for INPUT 1) 1 Connect each RCA connector of a component cable to the corresponding RCA INPUT 1 terminals on the projector. 2 Connect the other end of the cable to the corresponding terminals on a DVD player or DTV decoder. CAUTION • Make sure to turn both the projector and the video equipment off, before switching the "DIGITAL INPUT TYPE" swich and connecting. Projector 2 To component output terminals DVD player Component cable (commercially available) or DTV decoder 1 Connecting to a DVD player and DTV decoder with component output (for INPUT 2) 1 Connect the 3 RCA to 15-pin D-Sub cable using the DVI to 15-pin D-Sub adaptor. 2 Use the above cables to connect the projector and the DTV decoder. When connecting this projector to analog RGB output of the DTV decoder, select "Component" for "Signal Type" on the OSD menu or press RGB/COMP. on the remote control. (See page 36.) CAUTION • Make sure to turn both the projector and the video equipment off, before switching the "DIGITAL INPUT TYPE" swich and connecting. Projector E-13 DVI to 15-pin D-sub adaptor (sold separately AN-A1DV) 3 RCA to 15-pin D-sub cable (sold separately AN-C3CP) DVD player or DTV decoder